JVC KS-AX6700 - Standard Schematic Diagrams

6
5
4
3
2
1
BCDEFGH I JA
7
KS-AX6700
2-2
Caution
If electricity is connected during disassembly, it must be a no load current. If it is load
current, be sure to attach a heat sink to the power-amp IC. This will be damaged if the
above precautions are not followed, as it does not have a sub heat sink attached to it.
Indicates main signal
Standard schematic diagrams
Main board and sub [1/2] /sub2 board circuit diagram
SUB2 PCB
SUB1 PCB