Need help?Do you have a question about the JVC JA-S11G and is the answer not in the manual?
General| Damping Factor | 30 |
|---|---|
| Input Sensitivity | 2.5mV (MM), 150mV (line) |
| Signal to Noise Ratio | 75dB (MM), 95dB (line) |
| Speaker Load Impedance | 4Ω to 16Ω |
| Frequency Response | 10Hz to 50kHz |
| Total Harmonic Distortion | 0.08% |
| Output | 150mV (line) |
Details output power, distortion, and impedance of the power amplifier.
Details input sensitivity, output level, and frequency response of the pre-amplifier.
Covers voltage requirements and power usage across different regions.
Provides the physical dimensions and weight of the unit.
Details the front panel components and their assembly.
Details the rear panel components and their assembly for different regions.
Details the chassis base components and their assembly.
Details the power transformer and its mounting bracket.
Details the main control board, its schematic, and component list.
Lists specific transistors, ICs, diodes, and resistors for the main board.
Lists capacitor components for the main control board.
Lists other components and identification for the main control board.
Details the TPS-69 AC primary board, its schematic, and components.
Details the TPS-70 AC primary board, its schematic, and components.
To Next Page
