Need help?Do you have a question about the JVC JL-B44 and is the answer not in the manual?
General| Motor | DC servo motor |
|---|---|
| Platter | Aluminum die-cast, 300mm diameter |
| Effective length | 220 mm |
| Overhang | 15 mm |
| Tracking force range | 0 to 3g |
| Type | Belt-drive |
| Speeds | 33, 45rpm |
| Tonearm | Static balance S-shaped tonearm |
| Cartridge weight range | 4 to 9.5g |
| Dimensions | 440 x 360 x 150 mm |
| Weight | 8.0kg |
Details of the motor drive system, speeds, wow & flutter, signal-to-noise ratio, and platter specifications.
Specifications for the tonearm, including type, effective length, tracking error, and stylus pressure range.
Lists key features, base construction, and general operational details like power source and dimensions.
Step-by-step guide for setting the correct stylus tracking force on the tonearm.
Procedure for setting the anti-skating force based on stylus pressure to prevent skipping.
Instructions for ensuring the stylus is perpendicular to the record surface for optimal playback.
How to fine-tune turntable speeds using adjustment knobs and understanding speed changeover.
Explains how to use the stroboscope markings to verify and adjust playback speed accuracy.
Guidance on how to remove and install a new phono cartridge, including connection details.
Procedure for setting the correct tonearm overhang for cartridge mounting.
Setting the correct clearance between the stylus and record surface when the arm is lifted.
How to vary tonearm height for different cartridges to ensure parallelism.
Instructions for balancing heavier cartridges by using the sub-weight.
Diagram and parts list for the pick-up arm and associated components.
To Next Page
