Need help?Do you have a question about the JVC QL-5 and is the answer not in the manual?
Diagram of the motor speed control circuitry.
Details on the integrated circuit and its signal patterns.
Steps to fix issues where the platter fails to spin.
Steps to resolve problems of excessive platter rotation speed.
Diagnosing and fixing speed lock errors.
Instructions on how to change the turntable stylus.
Guidance on replacing the entire phono cartridge.
Procedure to verify and adjust power supply voltages.
Steps to ensure the platter speed is accurately locked to the oscillator.
How to adjust the platter braking system for proper stopping.
Calibrating the vertical position of the tonearm.
Adjusting the height of the automatic arm lifter.
Setting the correct horizontal position of the cartridge in the headshell.
Adjusting the vertical tracking angle (VTA) of the headshell.
Setting the correct downward pressure of the stylus on the record.
Calibrating the force that counteracts the inward pull on the tonearm.
Adjusting the height of the tonearm rest.
Exploded view of the motor and cabinet assembly.
Comprehensive list of parts with region-specific numbers.
Exploded view of the tonearm assembly.
Details of the servomotor control PCB.
Details of the power supply PCB.
To Next Page
General
