JVC AL-F353BKX

JVC
FULLY-AUTOMATIC
TURNTABLE
AL-F333BK
AL-F353BK/AL-F353BKX
Instruction Book
BEDIENUNGSANLEITUNG: VOLLAUTOMATISCHER PLATT ENSPIELER
MANUEL D’INSTRUCTIONS: PLATINE TOURNE-DISQUE ENTIEREMENT AUTOMATIQUE
GEBRUIKSAANWLJZING: VOL-AUTOMATISCHE DRAAITAFEL
MANUAL DE INSTRUCCIONES: TOCADISCOS TOTALMENTE AUTOMATICO
BRUKSANVISNING: HELAUTOMATISK SKIVSPELARE
CORADII LIRIIZ
IOS BN
Component
AL-F333BK For Customer Use:
(Without
dust
cover)
Enter
below
the
Mode!
No.
and
Serial
|
(Ohne
Staubschu
tzhaube)
No.
which
is
located
either
on
the
rear,
|
(Pas
de
couvercle
anti-poussiére)
AL-F353BK
bottom
or
side
of
the
cab:ret.
Retain
|
(Zonder
stofkap)
|
AL-F353BKX
this
information
for
future
-e*erence.
|
(Sin tape)
:
(Utan
lock)
(Without
cartridge)
Model No.
(Kein Tonabnehmer)
(Pas de cartouche)
(Geen element)
(Sin cartucho) 9004101991
(Utan pickup)
Serial No,
Nee rt OR

JVC AL-F353BKX Specifications

General

Drive method	Belt Drive
Effective Arm Length	220 mm
Overhang	15 mm
Frequency Response	20 Hz - 20 kHz
Color	Black
Speeds	33, 45 RPM
Cartridge Type	MM Type
Output Voltage	2.5mV
Platter	Aluminum Die-Cast
Output	RCA

Summary

COMPU LINK Control System

Automatic Source Selection

Explains how to connect components for automatic source selection, enabling one-touch control.

Synchronized Recording

Details the procedure for synchronized recording from sources like CD or turntable to tape.

Preparations

Unpacking and Setting Up

Guides through unpacking the turntable and initial setup steps, including removing spacers, fitting the belt, and setting voltage.

Cartridge Mounting and Replacement

Connection to Amplifier or Receiver

Instructions for connecting the turntable to an amplifier or receiver via audio and remote control cables.

Description and Functions

EP Adapter Usage

Explains the use of the EP adapter for 45 rpm discs with large center holes.

Power Switch Operation

Details the ON and STAND BY positions of the power switch and its standby power consumption.

Speed Indicator Functions

Describes the function of the speed indicators under NORMAL and INVERSE settings for automatic speed selection.

Auto Speed Select Operation

Explains how to set the auto speed select knob for different disc sizes and types.

Stylus Replacement

Stylus Removal Procedure

Instructions for diagonally pulling the stylus assembly downwards for removal.

Stylus Installation Procedure

Instructions for pushing the stylus assembly upwards for installation.

Adjustments

Tonearm Elevator-Height Adjustment

Details how to adjust the tonearm elevator height for optimal stylus clearance above the platter.

Stylus Lead-in Adjustment

Explains how to adjust the stylus landing position for automatic record play.

Troubleshooting

Turntable Does Not Function

Troubleshooting steps for when the turntable does not operate, checking the drive belt and motor.

Size Detector Does Not Function

Steps to resolve issues with the automatic size detector, ensuring correct platter seat alignment.

No Sound at All

Guidance on troubleshooting no sound issues, focusing on proper connection to amplifier or other units.