JVC AL-F353BK

JVC
FULLY-AUTOMATIC
TURNTABLE
AL-F333BK
AL-F353BK/AL-F353BKX
Instruction Book
BEDIENUNGSANLEITUNG: VOLLAUTOMATISCHER PLATT ENSPIELER
MANUEL D’INSTRUCTIONS: PLATINE TOURNE-DISQUE ENTIEREMENT AUTOMATIQUE
GEBRUIKSAANWLJZING: VOL-AUTOMATISCHE DRAAITAFEL
MANUAL DE INSTRUCCIONES: TOCADISCOS TOTALMENTE AUTOMATICO
BRUKSANVISNING: HELAUTOMATISK SKIVSPELARE
CORADII LIRIIZ
IOS BN
Component
AL-F333BK For Customer Use:
(Without
dust
cover)
Enter
below
the
Mode!
No.
and
Serial
|
(Ohne
Staubschu
tzhaube)
No.
which
is
located
either
on
the
rear,
|
(Pas
de
couvercle
anti-poussiére)
AL-F353BK
bottom
or
side
of
the
cab:ret.
Retain
|
(Zonder
stofkap)
|
AL-F353BKX
this
information
for
future
-e*erence.
|
(Sin tape)
:
(Utan
lock)
(Without
cartridge)
Model No.
(Kein Tonabnehmer)
(Pas de cartouche)
(Geen element)
(Sin cartucho) 9004101991
(Utan pickup)
Serial No,
Nee rt OR

JVC AL-F353BK Specifications

General

Brand	JVC
Model	AL-F353BK
Category	Turntable
Language	English

Summary

Important Safety and Setup

Installation Guidelines

Proper placement, environmental conditions, and initial setup instructions.

Power Connection and Handling

Instructions for safely connecting, using, and disconnecting the power cord.

Basic Malfunction Advice

Guidance for resolving common operational issues and basic troubleshooting.

COMPU LINK Control System

Automatic Source Selection

How to automatically select and switch between audio sources using COMPU LINK.

Synchronized Recording Function

Procedure for performing synchronized audio recording between components.

Turntable Preparations

Unpacking and Initial Setup

Steps for unpacking the turntable and performing initial assembly and configuration.

Cartridge Mounting and Replacement

Connecting to Amplifier or Receiver

Turntable Controls and Features

EP Adapter and Power Switch Operation

Usage instructions for the 45 RPM adapter and the main power switch.

Speed Indicators and Auto Speed Select

Explanation of turntable speed indicators and the automatic speed selection feature.

Stylus Replacement

Stylus Replacement Procedure

Step-by-step guide for safely removing and installing a new stylus assembly.

Turntable Adjustments

Tonearm Elevator Height Adjustment

How to adjust the tonearm elevator for optimal stylus clearance above the platter.

Stylus Lead-in Position Adjustment

Procedure for setting the correct starting position for the stylus on the record.

Troubleshooting Guide

Technical Specifications

Motor and Platter Specifications

Detailed technical data for the turntable's motor and platter assembly.

Tonearm and Cartridge Specifications

Technical details regarding the tonearm and the compatible cartridge.

General Unit Specifications

Overall dimensions, weight, and power requirements for the turntable.