Need help?Do you have a question about the JVC L-A10 and is the answer not in the manual?
General| Motor | DC servo motor |
|---|---|
| Overhang | 15 mm |
| Power Supply | AC 120V, 60 Hz |
| Type | Manual turntable |
| Speeds | 33, 45 rpm |
| Tonearm Type | Static balance, S-shaped tonearm |
| Cartridge | Moving magnet |
| Platter | Aluminum die-cast |
| Output | RCA |
Details the sequence of operations for the automatic change cycle.
Explains the automated lifting and returning of the tonearm.
Aligns cartridge longitudinal axis with headshell for optimum overhang.
Ensures stylus tip is perpendicular to the record surface.
Sets the correct distance between stylus tip and record surface.
Adjusts the timing of the auto-return function based on record groove.
Balances tonearm and sets the correct tracking force.
Adjusts anti-skating force based on cartridge type.
Adjusts pulley height for proper belt seating and speed.
Exploded view of the turntable's main mechanism components.
Exploded view and parts identification for the tonearm assembly.
Exploded view and parts identification for the mechanism base.
To Next Page
