Need help?Do you have a question about the JVC AL-F50B and is the answer not in the manual?
General| Drive System | Belt Drive |
|---|---|
| Motor | DC Servo Motor |
| Signal to Noise Ratio | 70 dB |
| Effective Length | 220 mm |
| Overhang | 15 mm |
| Frequency Response | 20 Hz - 20 kHz |
| Output | 2.5mV |
| Power Supply | AC 120V, 60 Hz |
| Speeds | 33 1/3, 45 rpm |
| Tonearm Type | Static Balance |
| Cartridge | Moving Magnet |
| Type | Semi-Automatic |
| Tracking Force | 1.5 - 2.5g |
| Platter | Aluminum Die-cast |
| Output Level | 2.5mV |
Detailed steps for raising the tone arm, positioning, starting rotation, lowering the arm, and adjusting volume.
Instructions on how to pause playback using the UP/DOWN button or stop it using the REJECT button.
Guidance on lifting the tone arm, moving it to a desired position, and resuming playback.
Steps for recording audio from a vinyl record to a USB device, including LED indicators and file naming.
Advice on gently handling the cover, avoiding stylus contact, and proper cleaning methods for the stylus and unit.
Details on rating, driving method, speeds, USB function, dimensions, weight, and external power supply.
Instructions on responsible disposal of the product, packaging, accessories, and batteries to protect the environment.
To Next Page
