To Next PageTo Next PageHow to fix JVC KD-A615 Car Receiver when no sound is heard from the speakers?
If you are experiencing no sound from the speakers of your JVC Car Receiver, you can try the following: * Adjust the volume to an audible level. * Ensure the unit is not muted or paused. * Inspect the cords and connections for any issues.
Why won't my JVC KD-A615 detect my Bluetooth device?
If your JVC Car Receiver does not detect the Bluetooth device, check the Bluetooth settings of the device. You can also search from the Bluetooth device; after the device detects the unit, select “OPEN” on the unit to connect the device.
Why is my JVC KD-A615 generating noise?
If your JVC Car Receiver is generating noise, skip to another track or change the disc. Do not add the extension code or to non-MP3 or WMA tracks.
How to fix distorted sound on JVC KD-A615 Car Receiver?
If the sound is distorted on your JVC Car Receiver, deactivate the equalizer either on this unit or the iPod/iPhone.
Why is “READING” flashing on my JVC KD-A615 display?
If your JVC Car Receiver displays “READING” continuously, the readout time may vary depending on the USB device. Also, avoid using too many hierarchical levels and folders. You can also try turning the power off and on again, or reattaching the USB device.
How to eliminate static noise on JVC KD-A615 Car Receiver radio?
If you are experiencing static noise while listening to the radio on your JVC Car Receiver, make sure the antenna is firmly connected.
What does “NO FILE” mean on my JVC KD-A615 Car Receiver?
If your JVC Car Receiver displays “NO FILE”, check whether the selected folder, the connected USB device, or the iPod/iPhone contains a playable file.
Why are the characters displayed incorrectly on my JVC Car Receiver?
If the correct characters are not displayed on your JVC Car Receiver (e.g., album name), note that the unit can only display uppercase letters, numbers, and a limited number of symbols.
Why is the sound interrupted while playing a track on my JVC KD-A615?
If you are experiencing sound interruptions while playing a track on your JVC Car Receiver, it may be due to the MP3/WMA tracks not being properly copied onto the USB device. Try copying the MP3/WMA tracks again to the USB device.
What to do if “PROTECT” appears on JVC KD-A615 display?
If “PROTECT” appears on the display of your JVC Car Receiver and no operations can be performed, ensure the terminals of the speaker leads are properly covered with insulating tape. Then, reset the unit. If the issue persists, it is recommended to consult your JVC car audio dealer or a company supplying kits.
General| Type | Car Receiver |
|---|---|
| DIN Size | Single DIN |
| Channels | 4 |
| Peak Power Output | 50W x 4 |
| Tuner | AM/FM |
| CD Playback | Yes |
| MP3 Playback | Yes |
| WMA Playback | Yes |
| USB Input | Yes |
| Bluetooth | No |
| Display Type | LCD |
| Equalizer | Yes |
| Auxiliary Input | Yes |
| Detachable Faceplate | Yes |
