To Next Page
A
Allen SuarezSep 5, 2025
Why can't my JVC KD-A815 Car Receiver select “AM”?
- MMichael WebbSep 6, 2025
If “AM” cannot be selected on your JVC Car Receiver, check the = setting.
Why can't my JVC KD-A815 Car Receiver select “AM”?
If “AM” cannot be selected on your JVC Car Receiver, check the = setting.
What to do if the JVC KD-A815 Car Receiver does not detect the Bluetooth device?
If your JVC Car Receiver does not detect the Bluetooth device, search from the Bluetooth device again or reset the unit and search from the Bluetooth device again.
What to do if my JVC KD-A815 Car Receiver displays “Reset 08”?
If “Reset 08” appears on the display of your JVC Car Receiver, reconnect this unit and the HD Radio tuner box correctly, then reset the unit.
Why is the elapsed playing time not correct on my JVC KD-A815?
The elapsed playing time is sometimes not correct during playback on your JVC Car Receiver due to how the tracks are recorded on the disc (e.g., variable bit rate).
What to do if "Please Eject" appears on the display of my JVC Car Receiver?
If the JVC Car Receiver's display shows "Please Eject", it might be overheating. Eject the disc or switch to a different playback source.
What causes echo or noise in my JVC Car Receiver?
If echo or noise occurs in your JVC Car Receiver, adjust the microphone unit’s position.
Why does my JVC KD-A815 Car Receiver display “No Antenna”?
If “No Antenna” appears on the display of your JVC Car Receiver, connect the antenna firmly.
What to do if the disc sound is sometimes interrupted on my JVC KD-A815?
To resolve the issue of disc sound being interrupted on your JVC Car Receiver, stop playback when driving on rough roads, try a different disc, or check the cords and connections.
Why does my JVC Car Receiver display blank while listening to SIRIUS/XM Satellite radio?
If the display is blank while listening to the SIRIUS Satellite radio/XM Satellite radio on your JVC Car Receiver, there is no text information for the selected channel.
What to do if my JVC Car Receiver displays “Reading” keeps flashing?
If the display of your JVC Car Receiver shows “Reading” keeps flashing, consider the following: the readout time varies depending on the USB device; avoid using too many hierarchy or folders; turn the power off and then on again; avoid repeatedly pulling out or connecting the USB device while “Reading” is displayed.
General| Tuner | AM/FM |
|---|---|
| Audio Formats Supported | MP3, WMA |
| Bluetooth | No |
| USB Port | Yes |
| DIN Size | Single DIN |
| Channels | 4 |
| CD Player | Yes |
| CD-R/RW Playback | Yes |
| Detachable Faceplate | Yes |
| Remote Control | Yes |
| Auxiliary Input | Yes |
| Power Output | 50 Watts x 4 |
| RMS Power Output | 22 Watts x 4 |
| Display | LCD |
| Preamp Outputs | 3 Preamp Outputs |
| Equalizer | 13-band |
| Peak Power Output | 50 Watts x 4 |
