17ENGLISH
Warning messages
ERROR CNNCT (Error Connection)
The device is registered but the connection
has failed. Use “CONNECT” to connect the
device again. ( 14)
ERROR
Try the operation again. If “ERROR” appears
again, check if the device supports the
function you have tried.
UNFOUND
No available Bluetooth device is detected
by “SEARCH.”
LOADING *
The unit is updating the phone book.
PLEASE WAIT
The unit is preparing to use the Bluetooth
function. If the message does not disappear,
turn off and turn on the unit, then connect
the device again (or reset the unit).
RESET 8
Check the connection between the adapter
and this unit.
* Displays only when your mobile phone
is equipped with these functions and is
compatible with this unit.
Listening to the iPod/iPhone
You can connect the iPod/iPhone using the USB 2.0 cable (accessory of the iPod/iPhone) to the
USB input jack on the control panel.
USB 2.0 cable (accessory of
the iPod/iPhone)
Apple iPod/iPhone
USB input jack
• Disconnecting the iPod/iPhone will stop
playback. Press
/ SOURCE
to listen to another
playback source.
• For details, refer also to the instructions
supplied with your iPod/iPhone.
Caution:
• Avoid using the iPod/iPhone if it might hinder
your safety while driving.
• Make sure all important data has been backed
up to avoid losing the data.
EN12-21_KD-R611_003A_3.indd 17EN12-21_KD-R611_003A_3.indd 17 12/4/09 6:00:38 PM12/4/09 6:00:38 PM
To Next Page
Loading...
Need help?
General
