EasyManuals Logo
Home>JVC>Car Receiver>KD-A615

JVC KD-A615 User Manual

JVC KD-A615
134 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #38 background imageLoading...
Page #38 background image
38 ENGLISH
Symptom Remedy/Cause
USB device playback
Noise is generated.
The track played back is not an MP3/WMA track. Skip to
another file. (Do not add the extension code <.mp3> or
<.wma> to non-MP3 or WMA tracks.)
“READING” keeps flashing on
the display.
Readout time varies depending on the USB device.
Do not use too many hierarchy or folders.
Turn off the power then on again.
Reattach the USB device again.
“NO FILE” appears on the
display.
Check whether the selected folder, the connected USB
device, or the iPod/iPhone contains a playable file.
“NOT SUPPORT” appears on the
display and track skips.
Skip to the next track encoded in an appropriate format
or to the next non-copy-protected WMA track.
Tracks/folders are not played
back in the order you have
intended.
The playback order is determined by the write-in time
stamp. The first track/folder written into the USB device
will be the first track/folder for playback.
“CANNOT PLAY” flashes on
the display.
“NO USB” appears on the
display.
The unit cannot detect the
USB device.
Attach a USB device that contains tracks encoded in
an appropriate format.
Reattach the USB device again.
While playing a track, sound is
sometimes interrupted.
The MP3/WMA tracks have not been properly copied
into the USB device.
Copy MP3/WMA tracks again into the USB device, and
try again.
Correct characters are not
displayed (e.g. album name).
This unit can only display letters (upper case),
numbers, and a limited number of symbols. (
8)
Bluetooth *
2
Bluetooth device does not
detect the unit.
The unit can be connected with one Bluetooth mobile
phone and one Bluetooth audio device at a time.
While connecting a device, this unit cannot be detected
from another device. Disconnect currently connected
device and search again.
The unit does not detect the
Bluetooth device.
Check the Bluetooth setting of the device.
Search from the Bluetooth device. After the device
detects the unit, select “OPEN” on the unit to connect
the device. (
11)
*
2
For Bluetooth operations, refer also to the instructions supplied with the Bluetooth Adapter.
EN34-43_KD-R618_A615_R610[J]f.indd 38EN34-43_KD-R618_A615_R610[J]f.indd 38 11/19/09 11:36:47 AM11/19/09 11:36:47 AM

Table of Contents

Other manuals for JVC KD-A615

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC KD-A615 and is the answer not in the manual?

JVC KD-A615 Specifications

General IconGeneral
BrandJVC
ModelKD-A615
CategoryCar Receiver
LanguageEnglish

Related product manuals