9
ENGLISH
When an FM stereo broadcast is hard to
receive
1
2
3 Exit from the setting.
lights up on the display.
Reception improves, but stereo effect will
be lost.
To restore the stereo effect, select “Mono Off”
in step 2.
goes off.
Storing stations in memory
You can preset six stations for each band.
FM station automatic presetting —
SSM (Strong-station Sequential
Memory)
1 Select the FM band (FM1 – FM3) you
want to store into.
2
Radio operations
~
Ÿ
!
Start searching for a station.
When a station is received, searching
stops.
• When receiving an FM stereo broadcast
with sufficient signal strength,
lights up on the display.
To stop searching, press the same button
again.
To tune in to a station manually
In step ! above...
1
2 Select a desired station frequency.
Continued on next page...
EN08-15KD-AR870G820[J]1.indd 9EN08-15KD-AR870G820[J]1.indd 9 5/12/05 4:52:47 pm5/12/05 4:52:47 pm
To Next Page
Loading...
