JVC KD-AVX40 - Page 31

Bluetooth ----- fii
Dial Menu
r;::l.~
ill" Settmgs ...
~ ~ ..
Phone Connect
Phone Connect ---_. ®
• W21T
~
• ·P9011
"~"
~ ..
Enter
The device remains registered even after you
disconnect the device. Use <Phone Connect> (or
activate <Auto Connect» to connect the same
device from next time on. (I&' pages 57 and 58)
Device Menu ---!l
~
r; ::l. AudIO Connect
ill" Delete Pairing ..
~ ~.. New Palnng
• For connecting: Select<Phone Connect>/
<Audio Connect> then go to the next step. *
• For disconnecting: Select <Phone Disconnect>/
<Audio Disconnect>.
5 Select the registered device you want to
connect.
4 Select the desired setting.
3
2
1
Connecting/disconnecting a registered
device
New Pairing ---- {'lJ
Pm Code
~
.. .m- ..
~ ..
Enter
-
• To delete an unwanted digit, select a blank.
Now connection is established and you can use the
device through the unit.
o turns blue and the following icon appears when the
connection is established.
Device Menu ----- (*1
r; ::l •
f1"I .. ...
rn .. ~
o starts flashing.
6 Operate the target Bluetooth device. (While
"Open ... " is displayed on the monitor.)
Enter the same PIN code (as entered in the above
step) on the device to be connected.
5
4 Enter a PIN (Personal Identification Number)*
code to the unit.
• You can enter any number you like (1-digit to
16-digit number).
* Some devices have their own PIN code. Enter the
specified PIN code to the unit.
3
1§1
liliJ
Appears when the Bluetooth phone is
connected.
Appears when the Bluetooth audio player is
connected.
You can set the unit to connect a Bluetooth device
automatically when the unit is turned on. (I&' page
58)
Appears when the Bluetooth phone and the
Bluetooth audio player are connected.
* When a device has already conneaed to the unit,
<Phone (onnea> and <Audio (onnea> do not
appear.
31
OPERATIONS