JVC KD-AVX40 - Changing HD Radio Reception Mode

AV Menu -----
~
:OL.'I.
a .. ~ ~
Enler • ~
Mode
OXlLocal ----
OX
r;'l"~
~:
Mode ----
Mono
m"~
WI" SSM ..
t.:: a.. Blend Hold
ox
3
2
1
Tuning in to stations with
sufficient signal strength __
This function works only for FM bands.
Once you have activated this function (selected
<Local», it always works when searching for FM
stations.
AVMenu ~
r;~ .. Oh.d~
m
fl ..
a .. ~
Enler •• :I
Mode
3
2
Changing HD Radio reception
mode _
While receiving an HD Radio broadcast, the unit tunes
to digital or analog audio automatically due to the
receiving condition.
1
• If no sound can be heard from the selected setting,
change the setting to <ANALOG> or <DIGITAL>.
• The setting automatically changes to <AUTO> if you
tuned in to or change to another station, or if you
turned off the power.
• This setting cannot take effect for the conventional
FM/AM stations.
• If the radio station forces the reception mode to
digital, the DIGITAL indicator flashes.
Analog:
Digital:
Auto:
Tuning to analog audio only
Tuning to digital audio only
Switch between digital and analog
audio automatically
Only stations with sufficient signal strength will be
detected.
• The DX indicator goes off, then the LO indicator
lights up.
• During SSM search (Q> page 13), this function
cancels temporarily.
46