JVC KD-AVX40 - Page 35

• • •
~p r:;;;;;-. ~J'J"N
~ \::.::Y '-::Y
+ III til III
8wS
You can use the following buttons on the remote
controller for the Bluetooth phone operations. For
details, 1& pages 10 and 11.
Then, continue your conversation using the other
media.
Switching conversation media
(the unit/cellular phone) __
During a phone call conversation ...
On the unit:
See "Making a call." (1& pages 32 and 33)
In step 4 ...
1 Select <Preset Calls>.
The Preset Calls List appears .
2 Select the preset number.
To call a preset number _
On the remote:
Preset Memory ••• _.. $~
~
r; ~ • 2 22233336666
m
.. 3 44455556666 '
~ • 4 99988887777
Store 5 55566668888
• 11133334444
-
[Hold]
3 Select a preset number.
2
• If you try to copy a 101st phone book entry,
"Phonebook Full" appears on the monitor. Delete
unwanted names before copying (1& page 34).
Preset Memory •• -.. ®m
1 11122223333
r; ~ • 1 22233336666
m
.. 3 44455556666
~ • • 99988887777
Store~
6 11133334444
4 Store the phone number.
Presetting the phone numbers _
You can preset up to six phone numbers.
1 Display the phone number you want to
preset by using <Redial>, <Received Calls>,
<Phonebook>, or <Phone Number>.
6 Operate the target cellular phone.
Enter the same PIN code (as entered in the above
step) on the cellular phone then transfer the phone
book memory to the unit. (Refer to the instruction
manual supplied with your cellular phone.)
7 Finish the procedure.
5
The phone number selected in step 1 is now stored
in preset number 5.
PIIlN£
CS>
_YCl
IT)
8
35
OPERATIONS