JVC KD-AVX40 User Manual

Touch Pad-LCD: Light up when your finger touches the controls.
Monitor
Always lights.
Touch pad controls
Lights up when your hand
moves close to the controls.
Always lights.
Proxi/Motion-LCD: Light up when your hand moves close to the
controls.
Proximity/Motion:
Normal:
Touch Pad: Lights up when yourfinger Always lights.
touches the controls.
Initialize all settings you have made in ~. Hold ~ /II, then
reset the unit. 1& [3]
You can turn off the touch pad controls and monitor lights while turning
on the unit. 1& [5]
. ",;1 ~~;r~onnecting an external component to the CD changer jack on the
:_~
'i Changer/iPod*6: CD changer or iPod IJ& [39,40]
':(, External Input: Any other than the above. 1& [48]
• For connecting KS-SRA 1 OO/XMDJVCl 00, this setting is not required. It
is automatically detected.
:, Off: Cancels.
, On: Activates the key-touch tone.
Off: Cancels.
; .. ; ,,"'
Mutingl, Muting2: Select either one which mutes the sounds while
using the cellular phone.
'"';"/;:'j:;lj Selectable settings, [reference page]
*1 Selectable only for "Disc" and "USB." (Playback stops when you select one of the items.)
*2 Appears only when a SIRIUS Satellite Radio is connected.
*3 Not selectable when "A V Input" is selected as the source.
*4 The REVERSE GEAR SIGNAL lead connection is required 1& "lnstallationlConnection Manual." The rear view through
the camera appears on the monitor in "Full" aspect ratio (regardless of the aspect ratio setting) when you shift the
gear to the reverse (R) position.
*5 Not selectable when the component connected to the CD changer jack is selected as the source.
*6 The name of the component detected through the CD changer jack is shown.
*
7
The TEL MUTING lead connection is required. 1& "Installation/Connection Manual."
55
SETTINGS

JVC KD-AVX40 Specifications

General

Brand	JVC
Model	KD-AVX40
Category	Car Receiver
Language	English