EasyManua.ls Logo

JVC KD-BT12 - Audio and Input Settings; Scroll and Output Mode Settings; Subwoofer and Tag Settings; Input, Gain, and Band Settings

JVC KD-BT12
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENGLISH
26
Indications Item
( : Initial)
Setting, [reference page]
SCROLL *
5
Scroll
ONCE
AUTO
OFF
: Scrolls the displayed information once.
: Repeats scrolling (at 5-second intervals).
: Cancels.
Pressing DISP for more than one second can scroll the display
regardless of the setting.
L/O MODE
Line output mode
REAR
SUB.W
: Select if the REAR LINE OUT terminals are used for connecting the rear
speakers (through an external amplifier).
: Select if the REAR LINE OUT terminals are used for connecting a
subwoofer (through an external amplifier).
SUB.W FREQ *
6
Subwoofer cutoff
frequency
LOW
MID
HIGH
: Frequencies lower than 90 Hz are sent to the subwoofer.
: Frequencies lower than 135 Hz are sent to the subwoofer.
: Frequencies lower than 180 Hz are sent to the subwoofer.
SUB.W PHASE *
6
Subwoofer phase
180 DEG
0 DEG
: Select either “0 DEG” or “180 DEG” which reproduces a better sound.
EXT INPUT *
7
External input
CHANGER
EXT INPUT
: To connect a JVC CD changer, [16], or an Apple iPod, [17].
: To connect portable audio player to the CD changer jack, [20].
TAG DISPLAY
Tag display
TAG ON
TAG OFF
: Shows the Tag information while playing MP3/WMA tracks.
: Cancels.
AMP GAIN
Amplifier gain
control
LOW POWER
HIGH POWER
: VOLUME 00 – VOLUME 30 (Select this if the maximum power of the
speaker is less than 50 W to avoid damaging the speaker.)
: VOLUME 00 – VOLUME 50
IF BAND
Intermediate
frequency band
AUTO
WIDE
: Increases the tuner selectivity to reduce interference noises between
adjacent stations. (Stereo effect may be lost.)
: Subject to interference noises from adjacent stations, but sound
quality will not be degraded and the stereo effect will remain.
*
5
Some characters or symbols will not be shown correctly (or will be blanked) on the display.
*
6
Displayed only when “L/O MODE” is set to “SUB.W.”
*
7
Displayed only when one of the following sources is selected—FM, AM, DAB, CD, BLUETOOTH, AUX IN.
EN22-29_KD-BT11_003A_3.indd 26EN22-29_KD-BT11_003A_3.indd 26 11/30/07 3:11:53 PM11/30/07 3:11:53 PM

Related product manuals