JVC KD-BT12 - Basic Operations; Control Panel and Button Functions; Source Selection and Playback; Display Window Interpretation

ENGLISH
5OPERATIONS
Basic operations
Using the control panel
r • Adjust the sound mode.
• Enter the PSM settings [Hold].
t • Enter functions mode.
Press M MODE, then one of the following buttons
(within 5 seconds)...
EQ : Select the sound mode.
MO : Turn on/off monaural reception.
SSM : Automatic station presetting [Hold].
RPT : Select repeat play.
RND : Select random play.
5/∞ : Skip 10 tracks.
• Activate Voice Dialing [Hold].
y • FM/AM: Select preset station.
• DAB: Select preset DAB service.
• CD/CD-CH: Select folder/track/disc (for CD
changer).
• BLUETOOTH (PHONE): Dial preset phone
number *
2
.
u AUX (auxiliary) input jack
*
1
You cannot select these sources if they are not ready
or not connected.
*
2
For storing preset phone number, see page 14.
1 • DAB: Select DAB service.
• CD/CD-CH: Select folder.
• IPOD: Enter the main menu/Pause playback/
Confirm selection.
2 Eject disc.
3 • Turn on the power.
• Turn off the power [Hold].
• Attenuate the sound (if the power is on).
4 Volume control [Turn].
5 • FM/AM: Select the bands.
• BLUETOOTH (AUDIO): Start playback
6 Loading slot
7 Display window
8 • Activate/deactivate TA Standby Reception.
• Enter programme type searching mode [Hold].
9 Change the display information.
p Detach the panel.
q • Enter Bluetooth menu
• Display the last called number [Hold].
w • FM/AM: Search for station.
• DAB: Search for DAB ensemble.
• CD/CD-CH/IPOD: Select track.
• BLUETOOTH (AUDIO): Reverse skip/Forward
skip.
e Select the source.
FM/AM = DAB = CD *
1
= CD-CH *
1
/IPOD *
1
(or EXT INPUT) = BLUETOOTH = AUX IN =
(back to the beginning)
Continued on the next page
EN02-07_KD-BT11_003A_3.indd 5EN02-07_KD-BT11_003A_3.indd 5 11/30/07 3:11:18 PM11/30/07 3:11:18 PM