JVC KD-DV6101

11
ENGLISH
Canceling the display
demonstrations
If no operations are done for about 20 seconds,
display demonstration starts.
[Initial: DEMO ON]—see page 39.
1
2
3
4
Finish the procedure.
To activate the display demonstration
In step 3 above...
Setting the clock
1
2
Set the hour and minute.
1 Select “CLOCK H” (hour), then
adjust the hour.
2 Select “CLOCK M” (minute),
then adjust the minute.
3 Select “24H/12H” (minute), then
select “24H” (hour) or “12H”
(hour).
3 Finish the procedure.
To check the current clock time when the
power is turned off
EN08-17_KD-DV6101[E]3.indd 11EN08-17_KD-DV6101[E]3.indd 11 12/13/04 1:51:44 PM12/13/04 1:51:44 PM