50
Setup menu
• When the language you have selected is not recorded
on a file, the original language is automatically
used as the initial language. In addition, the initial
languages settings will not work as you set due to
their internal programming.
• When you select “16:9” for a picture whose aspect
ratio is 4:3, the picture slightly changes due to the
process for converting the picture width.
• Even if “4:3 PAN SCAN” is selected, the screen size
may become “4:3 LETTERBOX” for some files.
On-screen guide icons
During playback, the following guide icons may
appear for a while on the monitor.
: Playback
: Pause
: DVD-Video/DVD-VR/VCD: Forward slow
motion
: DVD-Video: Reverse slow motion
: Forward search
: Reverse search
DVD: The following icons appear at the beginning of
a scene containing:
: Multi-subtitle languages
: Multi-audio languages
: Multi-angle views
About sounds reproduced through the rear
terminals
• Through the analog terminals (Speaker out/
LINE OUT/2nd AUDIO OUT): 2-channel signal is
emitted. When playing a multi-channel encoded
disc, multi-channel signals are downmixed. DTS
sound cannot be reproduced. (AUDIO—DOWN
MIX: see page 43.)
• Through DIGITAL OUT (optical):
Digital signals (Linear PCM, Dolby Digital, DTS,
MPEG Audio) are emitted through this terminal.
(For more details, see table on page 51.)
To reproduce multi-channel sounds such as
Dolby Digital, DTS, and MPEG Audio, connect an
amplifier or a decoder compatible with these
multi-channel sources to this terminal, and set
“DIGITAL AUDIO OUTPUT” correctly. (See page 43.)
• About Dual Zone:
Through the 2nd AUDIO OUT, 2-channel signal is
emitted. When playing a multi-channel encoded
disc, multi-channel signals are downmixed. (See
page 28.)
EN46-53_DV7306_005A_f.indd 50EN46-53_DV7306_005A_f.indd 50 2/9/07 1:51:26 PM2/9/07 1:51:26 PM
To Next Page
Loading...
Need help?
General
