7INTRODUCTIONS
Preparation
Cancel the display demonstration and set the clock
• See also page 40.
~ Turn on the power.
Ÿ Enter the PSM settings.
! ] ⁄ Cancel the display demonstrations
Select “DEMO,” then “DEMO OFF.”
Set the clock
Select “CLOCK H” (hour), then adjust the hour.
Select “CLOCK M” (minute), then adjust the minute.
@ Finish the procedure.
When the power is turned off: Check the current clock time
When the power is turned on: Change the display information
EN02-07_DV7306_005A_f.indd 7EN02-07_DV7306_005A_f.indd 7 2/9/07 1:48:46 PM2/9/07 1:48:46 PM
To Next Page
Loading...
