ENGLISH
7INTRODUCTIONS
Preparation
Cancel the display demonstration and set the clock
• See also pages 45 and 46.
1
Turn on the power.
2
Enter the PSM settings.
3
Cancel the display demonstrations
Select “Demo,” then “Off.”
Set the clock
Select “Clock Hr” (hour), then adjust the hour.
Select “Clock Min” (minute), then adjust the minute.
Select “24H/12H,” then “24Hours” or “12Hours.”
4
Finish the procedure.
Changing the display information and pattern
• When the power is turned off: Check the current clock time
Ex.: When tuner is selected as the source
Source operation display Audio level meter display
(see “LevelMeter” on page 45)
EN02-09_KD-DV7402_001A_f.indd 7EN02-09_KD-DV7402_001A_f.indd 7 2/20/08 12:15:39 PM2/20/08 12:15:39 PM
Downloaded from Caradio-Manual.com Manuals
To Next Page
Loading...
