JVC KD-DVH426 - Initial Unit Setup and Configuration; Display Demo Cancel and Clock Setting

ENGLISH
5
Before operating the unit — Cancel the display demonstration and set the clock
• See also page 20.
~ Turn on the power.
Ÿ Enter the PSM settings.
! ] ⁄ Cancel the display demonstrations
Select “DEMO,” then “DEMO OFF.”
Set the clock
Select “CLOCK H” (hour), then adjust the hour.
Select “CLOCK M” (minute), then adjust the minute.
@ Finish the procedure.
When the power is turned off:
Check the current clock time
When the power is turned on:
Change the display information
EN02-05_KD-DVH426_1.indd 5EN02-05_KD-DVH426_1.indd 5 11/8/06 10:15:50 AM11/8/06 10:15:50 AM