JVC KD-HDR60 - iTunes Tagging and iPod;iPhone Warnings; iTunes Tagging Warning Messages

• You can enjoy iTunes Tagging with the following
types of iPod/iPhone:
- iPod classic, software version 1.0 or later
- iPod nano (3rd Generation), software version 1.0 or
later
- iPod nano (4th Generation), software version 1.0 or
later
- iPod nano (5th Generation), software version 1.0 or
later
- iPod touch (1 st Generation), software version 2.1
or later
- iPod touch (2nd Generation), software version 2.1
or later
- iPhone/iPhone 3G, software version 2.1 or later
- iPhone 3GS, software version 3.0 or later
• If the iPod/iPhone does not play correctly, please
update your iPod/iPhone software to the latest
version. For details about updating your iPod/iPhone,
visit <http://www.apple.com>.
• When you turn on this unit, the iPod/iPhone is
charged through this unit.
• iPod shuffle cannot be used with this unit.
• The text information may not be displayed correctly.
• If the text information contains more than 11
characters, it scrolls on the display.
This unit can display up to 33 characters.
Warning messages for iTunes Tagging
• MEMORY FULL
You are trying to store the 61 st PSD. Transfer the
tagged PSDs to the iPod/iPhone, or clear all tagged
PSDs. (See page 12.)
• TAG ALREADY SAVED
You are trying to tag the song for the 2nd time while
receiving one song.
• NO TAG DATA
The broadcast currently received does not support
the iTunes Tagging or the broadcast does not provide
PSD.
• CAN'T TRANS IPOD FULL
The memory ofthe iPod/iPhone is full.
36
• UNSUPPORTED DEVICE FOR TAGGING
The connected iPod/iPhone is not compatible with
iTunes Tagging.
• TRANS ERROR
The iPod/iPhone is disconnected during data transfer.
• TRANSOFF
Data transfer is canceled.
Notice:
When operating an iPod/iPhone, some operations
may not be performed correctly or as intended.
In this case, visit the following JVC web site:
<http://www.jvc.co.jp/english/car/> (English
website only)
JVC bears no responsibility for any loss of
data in an iPod/iPhone and/or USB mass
storage class device while using this System.
• You can enjoy iTunes Tagging with the following
types of iPod/iPhone:
- iPod classic, software version 1.0 or later
- iPod nano (3rd Generation), software version 1.0 or
later
- iPod nano (4th Generation), software version 1.0 or
later
- iPod nano (5th Generation), software version 1.0 or
later
- iPod touch (1 st Generation), software version 2.1
or later
- iPod touch (2nd Generation), software version 2.1
or later
- iPhone/iPhone 3G, software version 2.1 or later
- iPhone 3GS, software version 3.0 or later
• If the iPod/iPhone does not play correctly, please
update your iPod/iPhone software to the latest
version. For details about updating your iPod/iPhone,
visit <http://www.apple.com>.
• When you turn on this unit, the iPod/iPhone is
charged through this unit.
• iPod shuffle cannot be used with this unit.
• The text information may not be displayed correctly.
• If the text information contains more than 11
characters, it scrolls on the display.
This unit can display up to 33 characters.
Warning messages for iTunes Tagging
• MEMORY FULL
You are trying to store the 61 st PSD. Transfer the
tagged PSDs to the iPod/iPhone, or clear all tagged
PSDs. (See page 12.)
• TAG ALREADY SAVED
You are trying to tag the song for the 2nd time while
receiving one song.
• NO TAG DATA
The broadcast currently received does not support
the iTunes Tagging or the broadcast does not provide
PSD.
• CAN'T TRANS IPOD FULL
The memory ofthe iPod/iPhone is full.
36
• UNSUPPORTED DEVICE FOR TAGGING
The connected iPod/iPhone is not compatible with
iTunes Tagging.
• TRANS ERROR
The iPod/iPhone is disconnected during data transfer.
• TRANSOFF
Data transfer is canceled.
Notice:
When operating an iPod/iPhone, some operations
may not be performed correctly or as intended.
In this case, visit the following JVC web site:
<http://www.jvc.co.jp/english/car/> (English
website only)
JVC bears no responsibility for any loss of
data in an iPod/iPhone and/or USB mass
storage class device while using this System.