ENGLISH
19
SETTINGS
Creating your own color
—USER Color
You can create your own colors—“DAY COLOR” or
“NIGHT COLOR.”
DAY COLOR: Used when “DIMMER” is set to
“DIMMER OFF.”
NIGHT COLOR: Used when “DIMMER” is set to
“DIMMER ON.”
1
2
Select “COLOR” = “USER.”
3 While “USER” is shown on the display...
4
[Turn] = [Press]
5 Select a primary color.
6 Adjust the level (00 to 31) of the selected
primary color.
If “00” is selected for all the primary colors, nothing
appear on the display.
7 Repeat steps 5 and 6 to adjust other primary
colors.
8 Exit from the setting.
• If no operation is done for about 30 seconds, the
operation will be canceled.
[Turn] = [Press]
[Turn] = [Press]
[Turn] = [Press]
Color settings (for KD-R501)
Category Menu items Selectable settings, [reference page]
SRC SELECT
AM *
11
AM station
• AM OFF
• AM ON
: Disable “AM” in source selection.
: Enable “AM” in source selection, [4].
AUX IN *
12
Auxiliary input
• AUX OFF
• AUX ON
: Disable “AUX IN” in source selection.
: Enable “AUX IN” in source selection, [4].
*
11
Displayed only when any source other than “AM” is selected.
*
12
Displayed only when any source other than “AUX IN” is selected.
EN16-21_KD-R501_003A_f.indd 19EN16-21_KD-R501_003A_f.indd 19 9/10/08 11:11:34 AM9/10/08 11:11:34 AM
To Next Page
Loading...
