13ENGLISH
Continued...
Storing your own sound mode
You can store your own adjustments in
memory.
1
2
] <PRO EQ> ] <BASS/ MIDDLE/ TREBLE>
[Hold]
3
Adjust the sound elements (see table
below) of the selected tone.
4
Repeat steps 2 and 3 to adjust other
tones.
The adjustments made is automatically
stored and changed to “USER.”
Menu operations
1
If no operation is done
for about 60 seconds, the
operation will be canceled.
2 3
Repeat step 2 if necessary.
• To return to the previous
menu, press T/P BACK.
• To exit from the menu, press
DISP or MENU.
[Hold]
Menu item
Selectable setting, [Initial: Underlined]
DEMO
For settings, see page 4.
CLOCK
CLOCK SET
For settings, see page 4.
24H/12H
For settings, see page 4.
CLOCK ADJ *
1
AUTO
: The built-in clock is automatically adjusted using the CT (clock time) data in the
Radio Data System signal. /
OFF
: Cancels.
DIMMER
DIMMER SET AUTO
: Changes the display and button illumination between the Day/Night adjustments
in <BRIGHTNESS> setting when you turn off/on the car headlights
*
2
. /
ON
: Selects the
Night adjustments in <BRIGHTNESS> setting for the display and button illumination. /
OFF
: Selects the Day adjustments in <BRIGHTNESS> setting for the display and button
illumination.
BRIGHTNESS DAY
[
25
] /
NIGHT
[
11
] : Selects the display and button illumination brightness level
[
00
—
31
] for day and night.
DISPLAY
SCROLL *
3
ONCE
: Scrolls the displayed information once. /
AUTO
: Repeats scrolling (at 5-second
intervals). /
OFF
: Cancels.
(Pressing
DISP
for more than one second can scroll the display regardless of the setting.)
TAG DISPLAY ON
: Shows the Tag information while playing MP3/WMA tracks. /
OFF
: Cancels.
*
1
Takes effect only when CT (clock time) data is received.
*
2
The illumination control lead connection is required. (See “Installation/Connection Manual.”) This setting may not work
correctly on some vehicles (particularly on those having a control dial for dimming). In this case, change the setting to
any other than <DIMMER AUTO>.
*
3
Some characters or symbols will not be shown correctly (or will be blanked) on the display.
Frequency / Level / Q [Initial: Underlined]
BASS
60/ 80/ 100/ 200 Hz –06 to +06 [ 00 ] Q1.0/ 1.25/ 1.5/ 2.0
MIDDLE
0.5/ 1.0/ 1.5/ 2.5 kHz –06 to +06 [ 00 ] Q0.75/ 1.0/ 1.25
TREBLE
10.0/ 12.5/ 15.0/ 17.5 kHz –06 to +06 [ 00 ] Q FIX
EN02-19_KD-R521_003A_f.indd 13EN02-19_KD-R521_003A_f.indd 13 10/13/10 12:45:36 PM10/13/10 12:45:36 PM
To Next Page
Loading...
