JVC KD-R520 - Display and Clock Settings; Cancel Demo and Set Clock

Canceling the display demonstration
• Display demonstration will be activated automatically if no operation is done for about 20 seconds.
1 Turn on the power. 4 Select <DEMO OFF>.
1I~[HOld]
2
(Initial setting)
5
3
(Initial setting)
6 Finish the procedure.
Setting the clock
1 Turn on the power.
• iIfp~[HOld]
2
[Hold]
(Initial setting)
3 Select <CLOCK>.
~
4 Select <CLOCK SET>.
5
(Initial setting)
6 Adjust the minute.
ta
~
7 Finish the procedure.
4 I ENGLISH