12
ENGLISH
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
AUDIO SETTINGS
PRO EQ
1
BASS
/
MIDDLE
/
TREBLE
:Select a sound tone.
2
Adjust the sound elements of the selected sound tone.
•
The settings are stored to
[USER]
.
•
The settings made may affect the current settings of
[EASY EQ]
.
BASS
Frequency:
60HZ
/
80HZ
/
100HZ
/
200HZ
(Default:
80HZ
Level:
LVL–06
to
LVL+06
LVL 00
Q:
Q1.0
/
Q1.25
/
Q1.5
/
Q2.0
Q1.0
)
MIDDLE
Frequency:
0.5KHZ
/
1.0KHZ
/
1.5KHZ
/
2.5KHZ
(Default:
1.0KHZ
Level:
LVL–06
to
LVL+06
LVL 00
Q:
Q0.75
/
Q1.0
/
Q1.25
Q1.25
)
TREBLE
Frequency:
10.0KHZ
/
12.5KHZ
/
15.0KHZ
/
17.5KHZ
(Default:
10.0KHZ
Level:
LVL–06
to
LVL+06
LVL 00
Q:
Q FIX
Q FIX
)
AUDIO CONTROL
BASS BOOST
LEVEL +01
to
LEVEL +05
(
LEVEL +01
): Selects your preferred bass boost level.;
OFF
:Cancels.
LOUDNESS LEVEL 01
/
LEVEL 02
:Boosts low or high frequencies to produce a well-balanced sound
at low volume.;
OFF
:Cancels.
SUB.W
LEVEL
*
1
SPK-OUT
*
2
SUB.W 00
to
SUB.W +06
(
SUB.W +03
):Adjusts the output
level of the subwoofer connected via speaker lead.
( 20)
PRE-OUT
*
3
SUB.W –08
to
SUB.W +08
(
SUB.W 00
):Adjusts the output level
of the subwoofer connected to the lineout terminals (REAR/SW)
through an external amplifier.
( 20)
SUBWOOFER
SET
*
3
ON
: Turns on the subwoofer output.;
OFF
: Cancels.
SUBWOOFER
LPF
*
1
FRQ THROUGH
:All signals are sent to the subwoofer;
FRQ 55HZ
/
FRQ 85HZ
/
FRQ 120HZ
:Audio signals with frequencies lower than
55Hz/85Hz/120Hz are sent to the subwoofer.
SUB.W
PHASE
*
1
*
4
REVERSE
(180°)/
NORMAL
(0°):Selects the phase of the subwoofer output to be in line
with the speaker output for optimum performance.
FADER POSITION R06
to
POSITION F06
(
POSITION 00
):Adjusts
the front and rear speaker output balance.
BALANCE
*
5
POSITION L06
to
POSITION R06
(
POSITION 00
):Adjusts
the left and right speaker output balance.
VOLUME
ADJUST LEVEL –15
to
LEVEL +06
(
LEVEL 00
):Preset the initial
volume level of each source (compared to the FM volume
level). Before adjustment, select the source you want to
adjust. (“VOLADJFIX” appears if FM is selected.)
AMP
GAIN LOW POWER
:Limits the maximum volume level to
25. (Select if the maximum power of each speaker is
less than 50W to prevent damaging the speakers.);
HIGH POWER
:The maximum volume level is 35.
D.T.EXPANDER
(Digital Track
Expander)
ON
:Creates realistic sound by compensating the high-
frequency components and restoring the rise-time of
the waveform that are lost in audio data compression.;
OFF
:Cancels.
SPK/PRE OUT
Depending on the speaker connection method, select the
appropriate setting to get the desired output. (
13,
Speaker output settings
)
*
1
Displayed only when
[SUBWOOFER SET]
is set to
[ON]
.
*
2
Displayed only when
[SPK/PRE
OUT]
is set to
[SUB.W/SUB.W]
.
( 13)
*
3
Displayed only when
[SPK/PRE OUT]
is set to
[REAR/SUB.W]
or
[SUB.W/SUB.W]
.
( 13)
*
4
Selectable only if a setting other than
[FRQ THROUGH]
is selected for
[SUBWOOFER LPF]
.
*
5
This adjustment will not affect the subwoofer output.
JS_JVC_KD_R691_E_EN_4.indd 12JS_JVC_KD_R691_E_EN_4.indd 12 7/10/2017 2:42:10 PM7/10/2017 2:42:10 PM
To Next Page
Loading...
Need help?
General
