N
Nicole WongSep 9, 2025
Why isn't SSM automatic presetting working on my JVC KD-R611?
- MMr. Kevin PooleSep 10, 2025
If SSM automatic presetting isn't working on your JVC Car Receiver, store stations manually.
To Next PageTo Next PageWhy isn't SSM automatic presetting working on my JVC KD-R611?
If SSM automatic presetting isn't working on your JVC Car Receiver, store stations manually.
How to fix JVC KD-R611 when no sound is coming from the speakers?
If no sound is coming from the speakers of your JVC Car Receiver: * Ensure the volume is at an audible level. * Confirm that the unit is not muted or paused. * Inspect the cords and connections.
Why won't my JVC KD-R611 Car Receiver detect my Bluetooth device?
If your JVC Car Receiver is not detecting the Bluetooth device: * Check the Bluetooth setting of the device. * Search from the Bluetooth device. After the device detects the unit, select “OPEN” on the unit to connect the device.
Why is sound sometimes interrupted during USB playback on my JVC KD-R611?
Copy MP3/WMA tracks again into the USB device, and try again, because the MP3/WMA tracks have not been properly copied into the USB device.
Why can't I select “AM” on my JVC KD-R611?
If “AM” cannot be selected on your JVC Car Receiver, check the setting.
Why is phone sound quality poor on my JVC KD-R611 with Bluetooth?
If phone sound quality is poor with Bluetooth on your JVC Car Receiver: * Reduce the distance between the unit and the Bluetooth mobile phone. * Move the car to a place where you can get a better signal reception.
Why does my JVC Car Receiver say “noSIGNAL” on DAB?
If your JVC Car Receiver displays “noSIGNAL” (DAB), move to an area with stronger signals.
Why is my JVC KD-R611 Car Receiver making noise during MP3/WMA playback?
If your JVC Car Receiver is generating noise during MP3/WMA playback, skip to another track or change the disc. Ensure that you do not add the extension code or to non-MP3 or WMA tracks.
Why are the characters not displayed correctly on my JVC KD-R611 (MP3/WMA playback)?
This unit can only display letters (upper case), numbers, and a limited number of symbols.
Why does “READING” keep flashing on my JVC KD-R611 Car Receiver?
If your JVC Car Receiver displays “READING” for an extended time, avoid using too many hierarchical levels and folders.
General| MP3 playback | Yes |
|---|---|
| Tuner type | HS-IV |
| FM band range | 87.5 - 108 MHz |
| LW band range | 144 - 279 kHz |
| Output power | 200 W |
| Product color | Black |
| Frequency range | 5 - 20000 Hz |
| Equalizer bands quantity | 3 |
| Signal-to-Noise Ratio (SNR) | 98 dB |
| File type | MP3/WMA |
| Key illumination color | Red |
Weight and Dimensions| Dimensions (WxDxH) | 181.6 x 159.6 x 51.6 mm |
|---|
Instructions for manually searching for radio stations by repeatedly pressing the search button.
Steps to improve FM stereo broadcast reception when signals are weak.
How to automatically preset up to 18 FM stations based on signal strength using SSM.
Procedures for stopping playback, ejecting discs, and handling the 'NO DISC' status.
How to prevent a disc from being ejected and how to cancel this prohibition.
Guide to choosing playback modes like Repeat (Track/Folder) and Random (Folder/All).
How to navigate and select tracks or folders on MP3/WMA discs using the control dial.
How to connect USB devices, including iPod/iPhone, and start playback of audio files.
Important advice on volume settings, safe operation, and potential issues with USB device compatibility.
Explains the 'OPEN' and 'SEARCH' methods for registering and establishing new Bluetooth connections.
How to answer, reject, or end calls, and how the unit behaves when a call is received.
How the unit notifies and displays incoming text messages from a compatible Bluetooth phone.
Options for automatically connecting to Bluetooth devices when the unit is turned on.
Settings for automatically answering or rejecting incoming calls on a Bluetooth phone.
How to connect an iPod or iPhone using the USB 2.0 cable for playback control.
Important advice on safe driving, data backup, and potential issues with iPod/iPhone compatibility.
How to search for DAB radio ensembles, with instructions to stop searching.
How to choose a primary or secondary service to listen to from a tuned DAB ensemble.
How to connect external components using the rear expansion port (requires adapters).
How to connect external audio players via the front auxiliary input jack.
How to activate or cancel the display demonstration mode.
Settings for clock time adjustment, 12/24 hour format, and automatic clock synchronization.
Options for display dimming based on headlights or general illumination control.
Information on playback resuming after power off and menu timeout.
How stations are stored in memory, including SSM and manual preset overwriting.
Explanation of Network-Tracking and TA/AF functionalities for FM reception.
Steps for cleaning connectors and proper methods for handling and storing discs.
How to deal with moisture inside the unit and preparing new discs for playback.
List of disc types and conditions that should not be used with the unit to prevent damage.
Solutions for issues like no sound, 'PROTECT' message, unit not working, and display problems.
Resolving issues with SSM, AM selection, and static noise during radio listening.
Solutions for disc playback errors, skipping, inability to eject, and interrupted sound.
Technical details on power output, load impedance, tone control range, frequency response, and SNR.
Specifications for FM, AM, and LW tuners, including sensitivity, selectivity, and stereo separation.
