Why is my JVC Car Receiver flashing 'READING'?
If your JVC Car Receiver is continuously flashing “READING”, avoid using excessive hierarchical levels and folders. As a solution, try reloading the disc or reattaching the USB device.
How to eject a disc from my JVC Car Receiver when it's stuck?
If the disc cannot be ejected from your JVC Car Receiver, press and hold to forcibly eject the disc. Exercise caution to prevent dropping the disc during ejection.
Why is there no sound from my Android device on my JVC Car Receiver?
If the sound cannot be heard during playback on your Android device with the JVC Car Receiver, try reconnecting the Android device. If in [AUDIO MODE], launch any media player application. If the problem persists, relaunch the current media player application or use another media player application. You can also try restarting the Android device. If none of these steps work, the connected Android device may be unable to route the audio signal to the unit.
What to do if my JVC Car Receiver shows a miswiring error?
If your JVC Car Receiver displays “MISWIRING CHECK Turn the power off, then check to be sure the terminals of WIRING THEN PWR ON”, simply turn the power on again.
What does 'PROTECTING SEND' mean on my JVC Car Receiver?
If your JVC Car Receiver displays “PROTECTING SEND Send the unit to the nearest service center.”, you should send the unit to the nearest service center.
What to do if my JVC Car Receiver says 'PLS LOGIN'?
If your JVC Car Receiver displays “PLS LOGIN”, log in again.
How to fix 'STATION LMT' error on JVC Car Receiver?
To resolve the issue of reaching the station limit on your JVC Car Receiver, retry after deleting unnecessary stations from your device.
What to do if my JVC Car Receiver says 'NO SKIPS'?
To address the “NO SKIPS” message on your JVC Car Receiver, retry later, as the skip limit has been reached.
How to fix 'CANNOT PLAY' error on JVC Car Receiver?
If your JVC Car Receiver is flashing “CANNOT PLAY”, ensure your Android device contains playable audio files. Try reconnecting the Android device, and if the problem persists, restart the Android device.
What does it mean when my JVC Car Receiver shows 'PLEASE' and 'EJECT'?
If you encounter the message “PLEASE” and “EJECT” appearing alternately on your JVC Car Receiver, press , then insert the disc correctly.
Procedures for cleaning the unit and its connectors.
Guidelines for proper handling and care of audio discs.
Overview and operation of the main unit's front panel controls.
Instructions for using the provided remote control unit.
Procedure for setting the current time on the unit.
Configuration of fundamental operational parameters and preferences.
Initiating audio playback from various media sources.
Methods for tuning into radio stations.
Connecting and playing audio from a portable device via auxiliary input.
Connecting and using a Bluetooth enabled device.
Initiating Pandora audio streaming.
Choosing from predefined sound equalization profiles.
Solutions for common unit problems and radio reception difficulties.
Resolving playback and connectivity issues with various media sources.
Specific issues and fixes for iPod/iPhone and USB device functionality.
Troubleshooting common problems with Android device connectivity and playback.
Step-by-step guide for mounting the unit into the dashboard.
Diagram and instructions for connecting the unit's wiring harness.
General| Power Output | 50 W x 4 |
|---|---|
| RMS Power | 22 W x 4 |
| Bluetooth | Yes |
| USB Port | Yes |
| Display Type | LCD |
| Subwoofer Output | Yes |
| AUX Input | Yes |
| CD Player | Yes |
| Remote Control | Yes |
| Detachable Faceplate | Yes |
| Built-in Microphone | Yes |
| Channels | 4 |
| Tuner | FM/AM |
| Audio Formats Supported | MP3, WMA |
| Equalizer | 13-Band |
To Next Page
