To Next PageTo Next PageHow to fix no sound on my JVC Car Receiver?
To address the issue of no sound from your JVC Car Receiver, first, adjust the volume to a suitable level. If the problem persists, verify that all cords and connections are properly secured.
What does it mean when my JVC Car Receiver shows 'PLEASE' and 'EJECT'?
If you encounter the message “PLEASE” and “EJECT” appearing alternately on your JVC Car Receiver, press , then insert the disc correctly.
Why does the sound skip on my JVC Car Receiver?
If you are experiencing intermittent playback or sound skipping on your JVC Car Receiver, try turning off the power saving mode on your Android device.
Why is my iPod/iPhone not working with my JVC Car Receiver?
If the iPod/iPhone does not turn on or does not work with your JVC Car Receiver, first, check the connection between the unit and the iPod/iPhone. If the problem persists, detach and reset the iPod/iPhone using a hard reset.
How to fix 'NO DEVICE' or flashing 'READING' on JVC Car Receiver?
If your JVC Car Receiver displays “NO DEVICE” or “READING” keeps flashing, try switching off the developer options on your Android device. If the issue continues, reconnect the Android device. Note that the connected Android device may not support [AUTO MODE].
Why is the radio reception poor on my JVC Car Receiver?
If you are experiencing poor radio reception on your JVC Car Receiver, ensure the antenna is firmly connected. Additionally, extend the antenna fully to improve reception.
What does 'PROTECTING SEND' mean on my JVC Car Receiver?
If your JVC Car Receiver displays “PROTECTING SEND Send the unit to the nearest service center.”, you should send the unit to the nearest service center.
What to do if my JVC Car Receiver shows a miswiring error?
If your JVC Car Receiver displays “MISWIRING CHECK Turn the power off, then check to be sure the terminals of WIRING THEN PWR ON”, simply turn the power on again.
Why is there no sound from my Android device on my JVC Car Receiver?
If the sound cannot be heard during playback on your Android device with the JVC Car Receiver, try reconnecting the Android device. If in [AUDIO MODE], launch any media player application. If the problem persists, relaunch the current media player application or use another media player application. You can also try restarting the Android device. If none of these steps work, the connected Android device may be unable to route the audio signal to the unit.
How to eject a disc from my JVC Car Receiver when it's stuck?
If the disc cannot be ejected from your JVC Car Receiver, press and hold to forcibly eject the disc. Exercise caution to prevent dropping the disc during ejection.
General| Power Output | 50 W x 4 |
|---|---|
| RMS Power | 22 W x 4 |
| Bluetooth | Yes |
| USB Port | Yes |
| Display Type | LCD |
| Subwoofer Output | Yes |
| AUX Input | Yes |
| CD Player | Yes |
| Remote Control | Yes |
| Detachable Faceplate | Yes |
| Built-in Microphone | Yes |
| Channels | 4 |
| Tuner | FM/AM |
| Audio Formats Supported | MP3, WMA |
| Equalizer | 13-Band |
Procedures for cleaning the unit and its connectors.
Guidelines for proper handling and care of audio discs.
Overview and operation of the main unit's front panel controls.
Instructions for using the provided remote control unit.
Procedure for setting the current time on the unit.
Configuration of fundamental operational parameters and preferences.
Initiating audio playback from various media sources.
Methods for tuning into radio stations.
Connecting and playing audio from a portable device via auxiliary input.
Connecting and using a Bluetooth enabled device.
Initiating Pandora audio streaming.
Choosing from predefined sound equalization profiles.
Solutions for common unit problems and radio reception difficulties.
Resolving playback and connectivity issues with various media sources.
Specific issues and fixes for iPod/iPhone and USB device functionality.
Troubleshooting common problems with Android device connectivity and playback.
Step-by-step guide for mounting the unit into the dashboard.
Diagram and instructions for connecting the unit's wiring harness.
