ENGLISH
48
Symptoms Remedies/Causes
iPod/iPhone
Only when connecting with the interface adapter
• “No Files” appears on the display. No tracks are stored. Import tracks to the iPod.
• The iPod’s controls do not work after
disconnecting from this unit.
Reset the iPod.
• “Disconnect” appears on the display. • Check the connecting cable and its connection.
• Charge the battery.
• No sound can be heard when connecting
an iPod nano.
• Disconnect the headphones from the iPod
nano.
• Update the firmware version of the iPod nano.
• “Reset 01” – “Reset 07” appears on the
display.
Disconnect the adapter from both this unit and
iPod. Then, connect it again.
• “Reset 08” appears on the display. Check the connection between the adapter and
this unit.
JVC bears no responsibility for any loss of data in an iPod/iPhone and/or USB mass storage class
device while using this System.
EN46-51_KD-A805[J]4.indd 48EN46-51_KD-A805[J]4.indd 48 1/14/09 4:56:32 PM1/14/09 4:56:32 PM
To Next Page
Loading...
Need help?
General
