23ENGLISH
Menu item
Selectable setting, [
Initial: Underlined
]
Dimmer
Dimmer Set Auto
:
Changes the display and button illumination between the Day/Night
adjustments in <Brightness>/<Color Setup> setting when you turn off/on the car
headlights
*
1
. /
Time Set
:
Sets the start/end timer for dimmer. Turn the control dial
to adjust the start time, then press the control dial to confirm. Repeat this step to enter
the end time. /
On
:
Selects the Night adjustments in <Brightness>/<Color Setup>
setting for the display and button illumination. /
Off
:
Selects the Day adjustments in
<Brightness>/<Color Setup> setting for the display and button illumination.
Brightness Day
[
31
] /
Night
[
15
] : Customizes the display and button illumination brightness
level [
00
—
31
] for day and night.
Display
Scroll *
2
Once
: Scrolls the displayed information once. /
Auto
: Repeats scrolling (at 5-second
intervals). /
Off
: Cancels.
(Pressing
DISP
for more than one second can scroll the display regardless of the setting.)
Tag Display On
: Shows the Tag information while playing MP3/WMA/WAV tracks. /
Off
: Cancels.
LCD Type Negative
: Negative pattern of the display. /
Positive
: Positive pattern of the display. /
Auto
: Positive pattern will be selected during the day time
*
3
; while negative pattern will
be used during the night time
*
3
.
Contrast Level
01
—
Level
08
[
Level 05
] : Adjust the display contrast to make the display
indications clear and legible.
PRO EQ
For settings, see page 21.
Audio
Fad/Bal *
4,
*
5
Fad
(fader) :
F6 — R6
[
0
] : Press
5
/
∞
to adjust the front and rear speakers output
balance. /
Bal
(balance) :
L6 — R6
[
0
] : Press
4
/
¢
to adjust the left
and right speakers output balance.
Loud On
: Boost low and high frequencies to produce a well-balanced sound at a low volume
level. /
Off
: Cancels.
Volume
Adjust
Level
–5 — Level
+5
[
Level 0
] : Presets the volume adjustment level of each source
(except “FM”), compared to the FM volume level. The volume level will automatically
increase or decrease when you change the source. Before adjustment, select the source you
want to adjust. (“FIX” appears on the display if “FM” is selected as the source.)
Subwoofer
On/Off
On
: Turns on the subwoofer output. /
Off
: Cancels.
*
1
The illumination control lead connection is required. (See “Installation/Connection Manual.”) This setting
may not work correctly on some vehicles (particularly on those having a control dial for dimming). In this case,
change the setting to any other than <Dimmer Auto>.
*
2
Some characters or symbols will not be shown correctly (or will be blanked) on the display.
*
3
Depends on the <Dimmer Set> setting.
*
4
If you are using a two-speaker system, set the fader level to <00>.
*
5
This adjustment will not affect the subwoofer output.
Continued...
EN02-29_KD-R826BT_001A_f.indd 23EN02-29_KD-R826BT_001A_f.indd 23 1/26/11 4:48:11 PM1/26/11 4:48:11 PM
To Next Page
Loading...
Need help?
General
