ENGLISH
26
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
TEXT SCROLL
*
2
SCROLL ONCE
:Scrolls the display information once.;
SCROLL
AUTO
:Repeats scrolling at 5-second intervals.;
SCROLL OFF
:Cancels.
COLOR
(for
KD-R980BTS
)
PRESET
Select color for button illumination and display illumination separately.
Default color:
ALL ZONE
: [
COLOR 08
],
DISP ZONE
: [
COLOR 01
],
ZONE 1
: [
COLOR 08
],
ZONE 2
: [
COLOR 46
]
1
Select a zone.
2
Select a color for the selected zone.
•
COLOR 01
to
COLOR 49
•
USER
: The color you have created for [
DAY COLOR
] or
[
NIGHT COLOR
] is shown.
•
COLOR FLOW01
to
COLOR FLOW03
: Color changes at different
speeds.
•
GROOVE
/
TECHNO
/
EMOTION
/
RELAX
/
SPECTRUM
/
SWEEP
/
POP
:
The selected color pattern is shown.*
3
(Selectable only when
[
ALL ZONE
] is selected in step
1
.)
DAY COLOR
Store your own day and night colors for different zone.
1
Select a zone.
2
RED
/
GREEN
/
BLUE
:Select a primary color.
3
00
to
31
:Select the level.
Repeat steps
2
and
3
for all the primary colors.
• Your setting is stored to [
USER
] in [
PRESET
].
• If [
00
] is selected for all primary colors for [
DISP ZONE
], nothing appears
on the display.
NIGHT COLOR
COLOR GUIDE
ON
:Changes the button illumination and display illumination when
settings are performed on menu and list search. Display zone will
automatically change depending on volume level.;
OFF
:Cancels.
[
NIGHT COLOR
] or [
DAY COLOR
] is changed by turning on or off your car’s
headlight.
*
1
The illumination control wire connection is required.
( 35)
*
2
Some characters or symbols will not be shown correctly (or will be blanked).
*
3
If one of these color pattern is selected, the [
ZONE 1
], [
DISP ZONE
], [
ZONE 2
] illumination
color will change to the default color.
DISPLAY SETTINGS
KD-R980BTS KD-R880BT
1 Press and hold .
2 Turn the volume knob to select an item (see the following table),
then press the knob.
3 Repeat step 2 until the desired item is selected/activated or follow
the instructions stated on the selected item.
4 Press to exit.
To return to the previous setting item, press
.
Default:
XX
DISPLAY
DIMMER
Dim the illumination.
OFF
:Dimmer is turned off.
ON
:Dimmer is turned on. Brightness changes to [
NIGHT
] setting.
(
[
BRIGHTNESS
]
)
DIMMER TIME
:Set the dimmer on and off time.
1
Turn the volume knob to adjust the [
ON
] time, then press the knob.
2
Turn the volume knob to adjust the [
OFF
] time, then press the knob.
(Default: [
ON
]:
PM 6:00
; [
OFF
]:
AM 6:00
)
DIMMER AUTO
:Dimmer turns on and off automatically when you turn off or
on the car headlights. *
1
BRIGHTNESS
Set the brightness for day and night separately.
1
DAY
/
NIGHT
:Select day or night.
2
Select a zone.
3
Set the brightness level (
LEVEL 00
to
LEVEL 31
).
(Default: [
DAY
]:
LEVEL 31
; [
NIGHT
]:
LEVEL 15
)
JS_JVC_KD_R980BTS_K_EN_5.indd 26JS_JVC_KD_R980BTS_K_EN_5.indd 26 6/6/2016 12:03:57 PM6/6/2016 12:03:57 PM
To Next Page
Loading...
