JVC KD-R895BTS

ENGLISH
25
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
PRO EQ Adjust your own sound settings.
• The settings are stored to
[USER] .
• The settings made may affect the current settings of
[EASY EQ] .
62.5HZ
LEVEL –09 to LEVEL +09 (LEVEL 00) : Adjusts the level to memorize for each source.
(Before making an adjustment, select the source you want to adjust.)
ON :Turns on the extended bass.; OFF :Cancels.
100HZ / 160HZ / 250HZ / 400HZ / 630HZ / 1KHZ / 1.6KHZ / 2.5KHZ / 4KHZ / 6.3KHZ / 10KHZ /
16kHZ
LEVEL –09 to LEVEL +09 (LEVEL 00) : Adjusts the level to memorize for each source.
(Before making an adjustment, select the source you want to adjust.)
Q FACTOR 1.35 / 1.50 / 2.00 :Adjust the quality factor.
AUDIO CONTROL
BASS BOOST
LEVEL +01 to LEVEL +05 : Selects your preferred bass boost level.;
OFF :Cancels.
LOUDNESS LEVEL 01 / LEVEL 02 :Boosts low or high frequencies to produce a well-
balanced sound at low volume.;
OFF :Cancels.
SUB.W LEVEL
*
1
SPK-OUT
*
2
(Not applicable when 3-way crossover is selected.)
SUB.W 00 to SUB.W +06 ( SUB.W +03 ):Adjusts the
output level of the subwoofer connected via speaker
lead.
( 42)
PRE-OUT
*
3
SUB.W –50 to SUB.W +10 ( SUB.W 00 ):Adjusts
the output level of the subwoofer connected to
the lineout terminals (SW or REAR/SW) through an
external amplifier.
( 43)
SUBWOOFER
SET
*
3
ON : Turns on the subwoofer output.; OFF :Cancels.
FADER (Not applicable when 3-way crossover is selected.)
POSITION R15 to POSITION F15 ( POSITION 00 ):Adjusts the front and
rear speaker output balance.
BALANCE
*
4
POSITION L15 to POSITION R15 ( POSITION 00 ):Adjusts the left and
right speaker output balance.
VOLUME  ADJUST LEVEL –15 to LEVEL +06 ( LEVEL 00 ):Preset the initial volume level
of each source (compared to the FM volume level). Before adjustment,
select the source you want to adjust.
AMP  GAIN LOW  POWER :Limits the maximum volume level to 25. (Select if the
maximum power of each speaker is less than 50W to prevent damaging
the speakers.);
HIGH POWER :The maximum volume level is 35.
SPK/PRE  OUT (Not applicable when 3-way crossover is selected.)
Depending on the speaker connection method, select the appropriate
setting to get the desired output.
( 26, Speaker output settings)
SPEAKER SIZE
Depending on the crossover type you have selected ( [X ' OVER
TYPE]
), 2-way crossover or 3-way crossover setting items will be shown.
( 27, Crossover settings)
By default, 2-way crossover type is selected.
X ' OVER
DTA SETTINGS
For settings, 28, Digital Time Alignment settings .
CAR SETTINGS
X ' OVER TYPE Caution
: Adjust the volume before changing the [X ' OVER TYPE] to
avoid the sudden increase or decrease of the output level.
2-WAY (Displayed only when [3-WAY] is selected.)
YES :Selects two way crossover type.; NO :Cancels.
3-WAY (Displayed only when [2-WAY] is selected.)
YES :Selects three way crossover type.; NO :Cancels.
*
1
Displayed only when [SUBWOOFER SET] is set to [ON] .
*
2
For 2-way crossover: Displayed only when [SPK/PRE OUT] is set to [SUB.W/SUB.W] .
( 26)
*
3
For 2-way crossover: Displayed only when [SPK/PRE OUT] is set to [REAR/SUB.W] or
[SUB.W/SUB.W] . ( 26)
*
4
This adjustment will not affect the subwoofer output.
AUDIO SETTINGS
JS_JVC_KD_R995BTS_K_EN_03.indd 25JS_JVC_KD_R995BTS_K_EN_03.indd 25 7/6/2017 8:40:58 AM7/6/2017 8:40:58 AM