JVC KD-R895BTS

ENGLISH
29
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
AUDIO SETTINGS
DISPLAY SETTINGS
Zone identification for brightness setting
KD-R792BT/KD-R790BT/KD-RD79BT/
KD-R99MBS
KD-R995BTS/KD-R990BTS/KD-R895BTS/
KD-RD99BTS
Zone identification for color setting
KD-R99MBSKD-R995BTS/KD-R990BTS/KD-R895BTS/
KD-RD99BTS
1 Press and hold .
2 Turn the volume knob to select an item ( 30 ), then press the
knob.
3 Repeat step 2 until the desired item is selected/activated or follow
the instructions stated on the selected item.
4 Press to exit.
To return to the previous setting item, press
.
Determining the value for [DISTANCE] and [GAIN] of [DTA SETTINGS]
If you specify the distance from the center of the
currently set listening position to every speaker,
the delay time will be automatically computed
and set.
1 Determine the center of the currently set
listening position as the reference point.
2 Measure the distances from the reference
point to the speakers.
3 Calculate the differences between the distance
of the furthest speaker (rear speaker) and
other speakers.
4 Set the [DISTANCE] calculated in step 3 for
individual speakers.
5 Adjust [GAIN] for individual speakers.
Example: When
[FRONT ALL] is selected as the
listening position
*
1
Before making an adjustment, select the speaker:
When 2-way crossover is selected:
FRONT LEFT / FRONT RIGHT / REAR LEFT / REAR RIGHT / SUBWOOFER:
– [REAR LEFT] , [REAR RIGHT] and [SUBWOOFER] is selectable only if a setting other than
[NONE] is selected for [REAR] and [SUBWOOFER] of [SPEAKER SIZE] . ( 27)
When 3-way crossover is selected:
TWEETER LEFT / TWEETER RIGHT / MID LEFT / MID RIGHT / WOOFER:
– [WOOFER] is selectable only if a setting other than [NONE] is selected for [WOOFER] of
[SPEAKER SIZE] . ( 28)
*
2
Displayed only when [X ' OVER TYPE ] is set to [2-WAY] ( 25) and if a setting other
than
[NONE] is selected for [ REAR ] of [SPEAKER SIZE] . ( 27)
JS_JVC_KD_R995BTS_K_EN_03.indd 29JS_JVC_KD_R995BTS_K_EN_03.indd 29 7/6/2017 8:41:01 AM7/6/2017 8:41:01 AM