Setting the Radio Timer
You can tune in to a preset station at a specific
time regardless of the current source.
(Hold)
1
-<Tuner>
-<Radio Timer>
-<Off>/<Once>/
<Daily>
[Off] Cancels Radio Timer.
Once Activates once.
Daily Activates daily.
2
-<FM>/<AM>
-<1> ... <18> for FM/
<1> ... <6> for AM
3
Select the preset station.
4
Set the activation time.
5
Press MENU to exit.
lights up after the Radio Timer has been set.
Only one timer can be set. Setting a new timer
will override the previous setting.
The Radio Timer will not activate if the unit is
turned off or if <AM> is set to <Hide> after
selecting an AM station for the timer.
(' page 26)
Naming the stations
You can assign names for up to 30 station
frequencies (FM and AM) using a maximum of 8
characters for each name.
1
Select <FM> or <AM>.
2
Enter “Name Entry” menu.
Select the desired character (see below) or a
space, then move to the next (or previous)
character position.
Repeat step 3 until you have finished entering the
name.
3
Enter the desired name.
4
Press the control dial to confirm.
If you try to assign names to more than 30
station frequencies, “Name Full” appears.
Delete unwanted names before assignment.
Available characters
A – Z (uppercase), a – z (lowercase), 0 – 9
(numbers), and the following symbols:
!”#
$
%& ’ ( ) +,
–./:;<=>?@
–
To erase the entire name, press and hold DISP
after step 2, then press the control dial.
Radio
ENGLISHޓ|
7
2012/2/15ޓ20:10:22KD-R90BT_U_EN
To Next Page
Loading...
Need help?
General
