18
ENGLISH
3
Select the desired mode — “VOL 1”,
“VOL 2” or “OFF”.
4
Press SEL (select) to finish the setting.
Selecting the level display
You can select the level display according to your
preference.
When shipped from the factory, “VOL 2” is selected.
VOL 1: Shows the volume level indicator and the
equalization pattern indicator.
VOL 2: Alternates “VOL 1” setting and illumination
display.
OFF: Erase the volume level indicator and the
equalization pattern indicator.
1
Press and hold SEL for more than 2
seconds.
“CLOCK H”, “CLOCK M”, “SCM LINK” or
“LEVEL” appears on the display.
2
Select “LEVEL” if not shown on the
display.
“CLOCK H”, “CLOCK M”, “SCM LINK” or
“LEVEL” appears on the display.
EN17-19KD-S620.S576.S570(J)F 26/04/2001, 9:37 AM18
To Next Page
Loading...
Need help?
General
