20
ENGLISH
Selecting the level display
You can select the level display according to your preference.
When shipped from the factory, “VOL 2” is selected.
VOL 1: Shows the volume level indicator and the equalization pattern indicator.
VOL 2: Alternates “VOL 1” setting and illumination display.
OFF: Erase the volume level indicator and the equalization pattern indicator.
1
Press and hold SEL for more than 2 seconds.
“CLOCK H”, “CLOCK M”, “SCM LINK” or “LEVEL” appears
on the display.
2
Select “LEVEL” if not shown on the display.
3
Select the desired mode — “VOL 1”, “VOL 2”
or “OFF”.
4
Finish the setting.
3 1,4 2
Equalization pattern indicator
EN19-21.KD-S611[E]f 11/23/00, 3:48 PM20
To Next Page
Loading...
