27
ENGLISH
To check the current clock time (changing the display mode)
Press DISP repeatedly. Each time you press the button, the display mode changes as follows.
• If the unit is not in use when you press DISP, the power turns on, the clock time is shown for
5 seconds, then the power turns off.
During tuner operation:
During CD operation:
Clock
Frequency
Clock
Elapsed playing time
4
Set the clock system.
1 Select “24H/12H.”
2 Select “24H” or “12H.”
5
Finish the setting.
SEL
1
2
Note:
For the indication change during RDS operation,
see page 15.
EN26-32.KD-S70R/S7R[E] 25/3/05, 4:40 AM27
To Next Page
Loading...
