28
ENGLISH
You can select the level display according to your preference.
When shipped from the factory, “VOL 2” is selected.
VOL 1: Shows the volume level indicator and the equalization pattern indicator.
VOL 2: Alternates “VOL 1” setting and illumination display.
OFF: Erase the volume level indicator and the equalization pattern indicator.
1
Press and hold SEL for more than 2 seconds
to call up the general setting mode (see page
29).
2
Select “LEVEL” if not shown on the display.
3
Select the desired mode — “VOL 1”, “VOL 2”
or “OFF”.
4
Finish the setting.
3
1,4
2
Volume level indicator
Equalization pattern indicator
Selecting the level display
EN26-32.KD-S70R/S7R[E] 25/3/05, 4:40 AM28
To Next Page
Loading...
Need help?
General
