22
ENGLISH
OTHER MAIN FUNCTIONS
Selecting the level display
You can select the level display according to your
preference.
When shipped from the factory, “VOL 2” is selected.
1
Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(See page 23.)
2
Select “LEVEL.”
3
Select the desired mode—“VOL 1,”
“VOL 2,” or “OFF.”
• VOL 1: Shows the volume level indicator.
• VOL 2: Alternates “VOL 1” setting and
illumination display.
• OFF: Erases the volume level
indicator.
4
Finish the setting.
Selecting the telephone muting
This mode is used when a cellular phone system
is connected. Depending on the phone system
used, select either “MUTING 1” or “MUTING 2,”
whichever mutes the sounds from this unit.
When shipped from the factory, this mode is
deactivated.
1
Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(See page 23.)
2
Select “TEL” (telephone muting).
3
Select the desired mode—“MUTING
1,” “MUTING 2,” or “OFF.”
• MUTING 1: Select this if this setting can
mute the sounds.
• MUTING 2: Select this if this setting can
mute the sounds.
• OFF: Cancels the telephone
muting.
4
Finish the setting.
SEL
SEL
SEL
SEL
EN22-24_KD-S743R[E_EX]f.p65 11/18/02, 6:36 PM22
To Next Page
Loading...
