EasyManuals Logo

JVC KD-S721R User Manual

JVC KD-S721R
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
11
ENGLISH
1
Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(PSM: see page 24.)
2
Select “AF-REG (alternative
frequency/regionalization
reception)” if not shown on the
display.
3
Select the desired mode – “AF,
“AF REG” or “OFF.
4
Finish the setting.
The same programme can be received on
different frequencies.
Programme 1
broadcasting
on frequency C
Programme 1
broadcasting
on frequency D
Programme 1
broadcasting
on frequency B
Programme 1
broadcasting
on frequency E
Programme 1
broadcasting
on frequency A
SEL
4
¢
SEL
Using TA Standby Reception
TA Standby Reception allows the unit to switch
temporarily to Traffic Announcement (TA) from the
current source (another FM station or CD).
TA Standby Reception will not work if you are listening
to an AM station.
Press TP/PTY to activate TA Standby Reception.
7 When the current source is FM, the TP indicator
either lights up or flashes.
If the TP indicator lights up, TA Standby
Reception is activated.
If a station starts broadcasting a traffic
announcement, “TRAFFIC” appears on the
display, and this unit automatically tunes in to
the station. The volume changes to the
preset TA volume level (see page 15) and
the traffic announcement can be heard.
If the TP indicator flashes, TA Standby
Reception is not yet activated since the
station being received does not provide the
signals used for TA Standby Reception.
To activate TA Standby Reception, you need
to tune in to another station providing these
signals. Press ¢ or 4 to search
for such a station.
When a station providing these signals is
tuned in, the TP indicator stops flashing and
remains lit. Now TA Standby Reception is
activated.
7 When the current source is other than FM,
the TP indicator lights up.
If a station starts broadcasting a traffic
announcement, “TRAFFIC” appears on the
display, and this unit automatically changes the
source and tunes in to the station.
To deactivate the TA Standby Reception, press
TP/PTY again.
TP/PTY
EN10-16KD-S871R[E]f.pm5 17/12/01, 5:58 PM11

Other manuals for JVC KD-S721R

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC KD-S721R and is the answer not in the manual?

JVC KD-S721R Specifications

General IconGeneral
BrandJVC
ModelKD-S721R
CategoryCar Receiver
LanguageEnglish

Related product manuals