23
ENGLISH
OTHER MAIN FUNCTIONS
SEL
Setting the clock
You can also set the clock system to either 24 hours
or 12 hours.
1
Press and hold SEL (select) for more
than 2 seconds so that one of the PSM
items appears on the display.
(See page 24.)
2
Set the hour.
1 Select “CLOCK H (hour)” if not shown on
the display.
2 Adjust the hour.
3
Set the minute.
1 Select “CLOCK M (minute).”
2 Adjust the minute.
4
Set the clock system.
1 Select “24H/12H.”
2 Select “24H” or “12H.”
2
1
2
1
4
¢
12
4
¢
4
¢
Changing the general settings
(PSM)
You can change the items listed on the next page
by using the PSM (Preferred Setting Mode) control.
Basic Procedure
1
Press and hold SEL (select) for more
than 2 seconds so that one of the PSM
items appears on the display.
(See page 24.)
2
Select the PSM item you want to
adjust. (See page 24.)
4
¢
5
Finish the setting.
To check the current clock time (changing
the display mode)
Press DISP (display) repeatedly. Each time you
press the button, the display mode changes as
follows:
• During tuner operation:
Note:
For the indication change during RDS operation,
see page 15.
• During CD operation:
• During power off
The power turns on, the clock time is shown for
5 seconds, then the power turns off.
SEL
ClockFrequency
ClockElapsed playing time
CONTINUED ON THE NEXT PAGE
EN23-26KD-S871R[E]f.pm5 14/12/01, 7:26 PM23
To Next Page
Loading...
