24
ENGLISH
Canceling Advanced SCM
You can cancel the Advanced SCM (Sound Control Memory), and unlink the sound modes
and the playback sources.
When shipped from the factory, a different sound mode can be stored in memory for each
source so that you can change the sound modes simply by changing the sources.
LINK ON: Advanced SCM (different SCMs for different sources)
LINK OFF: Conventional SCM (one SCM for all sources)
3
1,4
2
1
Press and hold SEL for more than 2 seconds
to call up the general setting mode (see page
29).
2
Select “SCM LINK” if not shown on the display.
3
Select the desired mode — “LINK ON” or
“LINK OFF”.
4
Finish the setting.
EN20-25.KD-S70R/S7R[E] 25/3/05, 4:39 AM24
To Next Page
Loading...
