To Next PageTo Next PageWhat to do if JVC KD-SR41J Car Receiver shows DC offset error?
If your JVC Car Receiver displays a DC offset error, ensure the terminals of the speaker leads are properly covered with insulating tape. Then, reset the receiver. If the error persists after resetting, the unit may require internal repair.
General| Type | Digital Media Receiver |
|---|---|
| Tuner | FM/AM |
| Maximum Output Power | 50W x 4 |
| RMS Power | 22W x 4 |
| Preamp Outputs | 2-channel |
| Pre-Output Level | 2.5V |
| Speaker Impedance | 4-8 ohms |
| Frequency Response | 20Hz - 20kHz |
| FM Frequency Range | 87.5MHz - 108.0MHz |
| Display Type | LCD |
| Detachable Faceplate | Yes |
| MP3 Playback | Yes |
| WMA Playback | Yes |
| FLAC Playback | No |
| Channels | 4 |
| CD Text | No |
| AAC Playback | No |
| Preset EQ | Yes |
| Clock | Yes |
| Bluetooth | No |
| USB Port | Front |
| AUX Input | Front |
General safety guidelines for product operation and maintenance.
Procedures to prevent static discharge that can damage sensitive components.
Guides on grounding to prevent damage to optical pickups from static discharge.
Specific warnings and precautions for Class 1 Laser Products.
Details the purpose and procedure for repairing a fuse pattern to prevent circuit damage.
Details the steps for repairing a fuse pattern, including adding a pattern fuse.
Lists and describes various test modes available for the unit.
Detailed operations and settings for the production test mode.
Operations and displays for the general service test mode.
Information and logging related to CD mechanism errors.
Procedure for clearing service information stored in the unit.
Information and handling of DC errors detected in the audio output.
Test mode for specific automotive applications (DOP).
Mode for testing and evaluating the CD mechanism's running performance.
List and explanation of error codes generated by the CD mechanism.
Steps to resolve or cancel a detected DC offset error.
Procedure for clearing recorded DC offset errors from EEPROM.
