To Next PageTo Next PageWhat to do if my JVC KD-X130M Car Receiver displays “MISWIRING CHECK WIRING THEN PWR ON”?
If the message “MISWIRING CHECK WIRING THEN PWR ON” appears, turn the power off, then check to be sure the terminals of the speaker wires are insulated properly. Turn the power on again.
Why can't I playback in AUTO MODE on my JVC Car Receiver?
If you cannot playback in [AUTO MODE], make sure JVC MUSIC PLAY APP is installed on the Android device. Also, try reconnecting the Android device and selecting the appropriate control mode. If this does not solve the problem, the connected Android device does not support [AUTO MODE].
Why does my JVC Car Receiver say “CANNOT PLAY” flashes and/ or connected device cannot be detected?
If “CANNOT PLAY” flashes and/ or the connected device cannot be detected, check whether the connected device is compatible with this unit and ensure the files are in supported formats. Also, try reattaching the device.
General| Brand | JVC |
|---|---|
| Model | KD-X130M |
| Category | Car Receiver |
| Language | English |
