ENGLISH
13
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Change the display information
Each time you press , the display information changes.
•
If the information is unavailable or not recorded, “NO TEXT”, “NO NAME”, or
other information (eg. station name) appears or display will be blank.
Source name Display information
FM
or
AM
Frequency Clock (back to the beginning)
(For FM Radio Data System stations only)
Station name (PS)/Program type (PTY)
Radio text
Radio
text+
Radio text+ title/Radio text+ artist
Frequency
Clock
(back to the beginning)
USB (For MP3/WMA/WAV/FLAC files)
Song title/Artist Album name/Artist Folder name
File name Playing time Clock (back to the
beginning)
iPod
or
ANDROID
When
[HEAD MODE]
/
[AUTO MODE]
is selected
(
6)
:
Song title/Artist
Album name/Artist Playing time
Clock
(back to the beginning)
AUX
AUX Clock (back to the beginning)
REFERENCES TROUBLESHOOTING
Symptom Remedy
General
Sound cannot be heard.
•
Adjust the volume to the optimum level.
•
Check the cords and connections.
“MISWIRING CHECK WIRING
THEN PWR ON” appears.
Turn the power off, then check to be sure the terminals of the
speaker wires are insulated properly. Turn the power on again.
“PROTECTING SEND SERVICE”
appears.
Send the unit to the nearest service center.
Source cannot be selected.
Check the
[SOURCE SELECT]
setting.
( 4)
Radio
•
Radio reception is poor.
•
Static noise while listening
to the radio.
Connect the antenna firmly.
USB/iPod
Playback order is not as
intended.
The playback order is determined by the file name .
Elapsed playing time is not
correct.
This depends on the recording process earlier.
“NOT SUPPORT” appears and
file skips.
Check whether the file is a playable format.
( 12)
“READING” keeps flashing.
•
Do not use too many hierarchical levels and folders.
•
Reattach the USB device.
“CANNOT PLAY” flashes and/
or connected device cannot
be detected.
•
Check whether the connected device is compatible with this unit and
ensure the files are in supported formats.
( 12)
•
Reattach the device.
The iPod/iPhone does not
turn on or does not work
•
Check the connection between this unit and iPod/iPhone.
•
Disconnect and reset the iPod/iPhone using hard reset.
Correct characters are not
displayed.
•
This unit can only display uppercase letters, numbers, and a limited
number of symbols.
•
Depending on the display language you have selected
( 4)
,
some characters may not be displayed correctly.
JS_JVC_KD_X252_E_EN_1.indd 13JS_JVC_KD_X252_E_EN_1.indd 13 20/6/2017 5:12:56 PM20/6/2017 5:12:56 PM
To Next Page
Loading...
Need help?
General
Weight and Dimensions
