JVC KD-X152

ENGLISH
13
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Zone identification for brightness setting
1 Press and hold .
2 Turn the volume knob to select an item (see the following
table), then press the knob.
3 Repeat step 2 until the desired item is selected/activated or
follow the instructions stated on the selected item.
4 Press to exit.
To return to the previous setting item, press .
Default:
XX
DISPLAY
DIMMER
Dim the illumination.
OFF :Dimmer is turned off. Brightness changes to [DAY] setting.
ON :Dimmer is turned on. Brightness changes to [NIGHT] setting.
(
[BRIGHTNESS] )
DIMMER TIME :Set the dimmer on and off time.
1 Turn the volume knob to adjust the [ON] time, then press the knob.
2 Turn the volume knob to adjust the [OFF] time, then press the knob.
(Default:
[ON] : PM6:00 ; [OFF] : AM6:00 )
DIMMER AUTO :Dimmer turns on and off automatically when you turn off or
on the car headlights.
*
1
DISPLAY SETTINGS
BRIGHTNESS Set the brightness for day and night separately.
1 DAY / NIGHT :Select day or night.
2 Select a zone. (See the illustration on the left column.)
3 LEVEL 00 to LEVEL 31 : Set the brightness level.
TEXT SCROLL
*
2
SCROLL ONCE :Scrolls the display information once.;
SCROLL AUTO :Repeats scrolling at 5-second intervals.;
SCROLL OFF :Cancels.
*
1
The illumination control wire connection is required. ( 19)
*
2
Some characters or symbols will not be shown correctly (or will be blanked).
JS_JVC_KD-X252_M_EN_1.indd 13JS_JVC_KD-X252_M_EN_1.indd 13 22/6/2017 9:54:44 AM22/6/2017 9:54:44 AM